![]() Atomic Layer Deposition: Li-ion BatteriesNovel solutions for enhanced energy electrical storage in integrated 3D Li-ion solid batteries focus on increased power density and energy capacity while enhancing cell lifetimes. In this context, atomic layer deposition has been shown to be a key enabling technology. Enhancement of charge/discharge kinetics via optimized ion and electron transport can be obtained from the thin film deposition of electrochemically active materials such as LiMCo (M: Co, Ni, Mn), V2O5, MnO2. The integration in 3D nanostructures of interdigitated electrodes needed for short transport pathways (high power) and optimized mass loading (energy storage) makes ALD atomic-level thickness control and unprecedented conformallity highly desirable. In addition, very thin ALD oxide coating, i.e., 2-10� thin, has been shown to significantly minimize capacity fading during charge/discharge by limiting electrode dissolution and electrolyte decomposition.Top: TEM image of a LiMn2O4 particle coated with 50� Al2O3 ALD layers to minimize capacity fading during charge/discharge. Bottom: Specific discharge capacity versus cycle number for bare LiMn2O4 cathode and three cathodes coated with four, six, and eight Al2O3 ALD layers. Ref - Guan, D. & Wang, Y. Ultrathin surface coatings to enhance cycling stability of LiMn2O4 cathode in lithium-ion batteries. Ionics (2012). doi:10.1007/s11581-012-0717-9 ; deposition performed on Savannah S100 ALD system |


